Performance Characteristics: UV, strong adhesive force, fast curing speed, stackable printing, and a wide range of suitable printing materials.
Applicable Substrate: processing PET material
Detailed
Brief introduction
FD-NS series ink is a UV-curable ink suitable for printing on PET materials and meeting the requirements of low halogen.
Features
1. It is good for handling the adhesive force of PET material.
2. It meets the low-halogen requirements.
3. Ink can be used for coating and screen printing.
Printing condition
Printing substrate: Treated PET material with a dyne value of 50 or more
Screen mesh count: 350 mesh or above
Coating thickness: Vanishing less than 10μm, color Ink less than 5μm
Curing condition
UV lamp types: Halogen lamps, mercury lamps, and LED lamps can all be cured
Curing energy: ≥100 mj/cm ²
Notes
-
PET materials must undergo surface treatment; otherwise, poor adhesion will occur. It is also possible to apply a layer of solvent-based ink or vanish first for primer treatment to ensure the adhesive force of the UV layer.
If applying PI material, it is recommended to use solvent-based ink or vanish as a primer before coating.
It is recommended that the thickness of vanish coating be less than 10μm and that of color ink be less than 5μm.
It is recommended that the curing equipment use multiple sets of UV lamps for low-energy curing to avoid deformation of the film due to heat. Or a combination of LED lamps and halogen lamps, LED lamps and mercury lamps can be used. The ink is first deeply cured by the LED lamp, and then supplemented by low-energy halogen lamps or mercury lamps for surface curing.
Environmental friendliness
1. Comply with regulations such as ROHs, REACH, ASTM F963, EN71-3(except for gold and silver), and California 65.
2. If there are control requirements for PAHs, please use it with caution.
The above data is obtained from multiple experiments by our company. Our company guarantees the authenticity of the information provided. In view of the differences in printing materials and construction conditions, our company cannot make any commitment.
Our company reserves the right to improve its own products. Any changes to its specifications will not be notified in advance.
