Ink Name: Lithographic Ink; HL series
Product Introduction: This series of inks is developed for high processing requirements and has the following characteristics:
Has moderate deep drawing performance (between the K series and AH series).
It has good drying effect and coating performance.
It has better printing adaptability than the AH series.
The product has passed RoHS, REACH (SVHC), EN-71-3, 94/62/EC and other tests.

Application scope: This series of ink is suitable for monochrome or multi-color offset printing machines, printed on tinplate/thin aluminum plate pre coated with white magnetic or base oil, and then coated with gloss oil for protection, used to present various graphic and color effects. Recommended for various metal cans and lids, especially for products with high requirements for deep drawing performance, but not recommended for products with high requirements for steaming and boiling resistance.
Drying conditions: 160 ° C; 5 ℃, 10 minutes
Precautions:
The recommended pH value for the dampening solution is 5.5 to 6.5.
When you need to dilute the ink color, please use HL-12 transparent ink or HL-52 pure white, and add as needed.
When reducing ink viscosity, please use K-SSA viscosity reducer and H-1102 diluent, which can be added according to actual needs to meet printing suitability.
Not recommended for double-sided printing.
※ Cannot be mixed with other series of inks, and should not be stacked on top of other series of inks (such as K, CDK, MDE series), otherwise it may cause dragging, back dirt, etc. When white ink is needed as a backing, HL series white ink should also be used.
When used for deep drawing processing, polyester type deep drawing coatings are required.
Users should conduct testing and evaluation on the finished product to ensure that it can meet subsequent applications (such as canning/lid forming, adhesion, steaming and boiling resistance, plastic bag printing, stacking and sticking, chemical substance restrictions, etc.) before using it for formal production. When there are changes in the substrate, matching, and process conditions, a reassessment should be conducted, especially paying attention to whether the adhesion of the gloss layer after stamping and forming meets the requirements.
※ If the finished product is intended for general indoor lighting and requires high light resistance, please choose a high light resistance variety.

Remarks:
1. Due to our company's inability to predict or control the usage conditions of printed products, we cannot guarantee the performance and recommended usage of the above-mentioned products. Users should understand and evaluate the applicability of the products before use. If you have any questions, please contact our technical personnel.
2. This product cannot be used for direct contact with food.
3. This version of the technical data was released on August 1, 2025 and is valid until December 31, 2026.
4. According to technological progress, our company has the right to make reasonable changes and improvements to this technical information in advance. Please refer to the latest version.