PAN series ink is a benzene-free high-performance surface printing ink used for printing films such as polyene type. It has excellent adhesion, heat resistance, printability and safety and hygiene.

Product uses and features

1.Process OPP, CPP, PE, POF and co-extruded films.

2.The printed materials have very little residual solvent and excellent environmental protection performance.

3.The color is bright and the gloss is good.

4.It has strong adhesion and good resistance to rubbing and scratches.

5.It has good printing adaptability and can adapt to printing at different machine speeds.

Reference color

General grade: 110 White, 280 Yellow, 360 Red, 800 Blue, 1000 Black, Mixed ink Oil, 262 Yellow, 3 Red, 300 Orange, 187 Red, 471 Peony, 930 Green, 500 Purple

Temperature resistance grades: F110 white, F280 yellow, F360 red, F800 blue

F1000 Black, F Ink Oil, F262 yellow, F3 Red, F300 Orange, F187 Red, F471 Peony, F930 Grass, F500 Purple

POF dedicated: F118 White Z, F280 Yellow Z, F360 Red Z, F800 Blue Z, F1000 Black Z, F Ink, F262 Yellow Z, F3 Red Z, F300 Orange Z, F187 Red Z, F471 Peony Z, F930 Grass Z, F500 Purple Z

Dilution and printing viscosity

white ink: 13~15 s, color ink: 14~16 s  ※ 3#Charn CupThe ratio of printing viscosity and thinner can be adjusted accordingly according to the printing pattern, drying capacity, printing speed and printing effect.

Notes

1..Ink may gel at low temperatures and be in a gel-like state. It can be restored to its original state by soaking in hot water or raising the temperature of the environment (around 20℃). After stirring, it can be used normally without any change in effect.

2.Gold and silver can only be mixed with silver paste and not gold powder. Moreover, the heat sealing performance of gold and silver is relatively poor and can only be used for ordinary purposes.

3.The light-colored high-temperature heat-resistant seal of 3 red may have discoloration. Please confirm whether it meets the requirements before use.

4..The surface treatment requirement for the printing substrate is ≥38 dynes. If the substrate is weakly treated for printing, it needs to be confirmed by yourself before use. For printing on films other than the above-mentioned ones or on special films, please contact our company.

Environmental protection regulations

1Complies with the requirements of regulations such as GB4806.14, GB4806.1, and GB31603;

2.Comply with the requirements of regulations such as ROHs, REACH, and EN71-3;

3.Comply with the standard QB/T 1046 "Gravure Plastic Film Composite Ink". 4. This product complies with the NL rules formulated by the Japan Printing Ink Association.

Product application cases